![]() |
|
#1
|
|||||
|
|||||
![]() Quote:
Thats what I was wondering. If you only have an inch and a half where does the water go on power outage? |
#2
|
|||||
|
|||||
![]() Pictures !
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything |
#3
|
|||||
|
|||||
![]() If your cheato is falling apart then I would trim it back. Alot.
Lower the water level in your sump if you can. Are your baffled to the top |
#4
|
|||||
|
|||||
![]() Yea im not sure how the cheato is jumping the baffle, mine just stays in the compartment thats its in
__________________
Current tank---125 gallon mixed reef 60 gallon sump, Reef octopus nw200 skimmer, Rapid LEDs, Maxspec gyre, Mp10s, Fuge, Biweekly 20% WC, QT everything |
#5
|
|||||
|
|||||
![]() It's probably.falling apart from low nutrients
|
#6
|
|||||
|
|||||
![]() If you come by my house in North Van I can give you everything you need to solve your problem. I used to have sooo many problems with this skimmer, now I drain the cup every 2 weeks and it's been running problem free for 5 months now and it's in the same section as chaeto
Or i can post a couple photos and material list for what you need Is this a first gen without the tension lock? If so I have a spare. |
#7
|
||||
|
||||
![]() thank you vancity!
the cheato very firm so its not falling apart. I have an emerald crab in there keeping things clean for me so he must be doing something |
![]() |
Thread Tools | |
Display Modes | |
|
|