DIY LED Using 10 Watt Arrays

[mike31154]

Here's what I've come up with for a cover. Mostly built, but need to fine tune, stain, cut vent holes, trim the edges & figure out the hanging scenario. The existing brackets for hanging don't protrude far enough through the new top. I suppose I could hang it from the top itself, but then I'd need to bolt the top to the frame & I'd rather have the top easily removable, so just resting on the frame. I'll figure something out.

Ended up getting a sheet of 1/8 mahogany plywood & fastening that to the end pieces. Amazing how stiff 1/8 ply can be when you're trying to bend it. I had to make two more semi arcs to support the plywood & make it bend properly in the center.