![]() |
|
#1
|
||||
|
||||
![]() Have the cartridges been replaced when you got it
__________________
........ |
#2
|
|||||
|
|||||
![]() No he said they were replaced fairly recently, he said the resin should be changed as most if it has changed color. But if it's coming out at 3ppm doesn't that mean to resin is still ok, or should u change it before the Ppm goes up? |
#3
|
||||
|
||||
![]() For cheap as they are I would replace all three And get a fresh start
__________________
........ |
#4
|
|||||
|
|||||
![]() Where in town would be the best place to pick them up from?
|
#5
|
||||
|
||||
![]() Concept has them all same with alot of water stores
![]()
__________________
........ |
#6
|
|||||
|
|||||
![]() |
#7
|
|||||
|
|||||
![]() Lastly does anyone know who would carry flow restrictors? The ration I'm getting is 7:1 which is way to high
|
![]() |
Thread Tools | |
Display Modes | |
|
|