![]() |
|
#1
|
|||||
|
|||||
![]() Quote:
Maybe I should trade you mine for ones that would fare better ... ![]() I'm thinking I'd like to open up some space lower down for the big birdsnest, but that involves a re-scape as there's nowhere for such a big colony right now I'm still on the fence about the whole idea Quote:
![]() |
#2
|
|||||
|
|||||
![]() Thursday night I jumped on the Chemiclean bandwagon
I've never seen skimmer pics during the process, so here's one for all of you that haven't yet done this ![]() Without knowing how much air the skimmer would produce, I decided to put an airstone in the DT. It's in front of an MP10. Well, as shown in the above photo, it's not necessary One thing I did do though for safety is put my battery backup air pump in the DT. I'd hate to lose critters if the power went out I'll get before and after pics up once the process is complete |
#3
|
|||||
|
|||||
![]() Greg, how is the treatment? Hope it is taking care of the cyano for you. I had to do the same in January as i had a few areas in the tank with cyano and chemiclean worked well for me and I had even let it run for a few extra days just to make certain it took all the cyano out.
__________________
ATI 48" 3x75W LED with 8x54W T5, 2xTunze 6105, 2 x Maxspect Gyre XF150, Bubble King Mini 200 ( soon to be replaced by a Bubble King SM 200), Eheim 1262, Via Aqua 300 watt Titanium heater, JBJ ATO, Apex Controller |
#4
|
|||||
|
|||||
![]() Looks like it did the trick
I'm waiting for the lights to come on today to get an 'after' pic I also let it run past 48 hours - just over 60 |
#5
|
|||||
|
|||||
![]() As I mentioned earlier, I ran the Chemiclean for just over 60 hours - it's just how my schedule worked out
I dosed it Thursday night. As others have noted, nothing much was happening by Friday night (first 24 hours) Saturday afternoon I was able to blow pretty much all of the cyano off of everything Sunday afternoon I did some more blowing but mostly was down to LR cleaning now instead of a cyano battle ![]() Man that stuff traps a lot of crud in the rock. I still have to deal with what it's done to my sand -clumps of detritus Having a larger sized sump, I was able to perform a 25% WC without touching the DT water level As the skimmer is still going bananas on it's lowest setting, I'll do another 25% tomorrow night At that time I'll change the carbon again This is before I dosed ![]() This is today ![]() My LR hasn't looked this good since last summer ![]() ![]() ![]() |
#6
|
|||||
|
|||||
![]() Tonight I performed another 25% WC
The skimmer was still going balistic with the cup off, but it became better when I put the cup back on I let it run a few gallons out the drain and it's looking manageable for now. It's still turned down as far as it goes As far as Chemicleam goes; I'd do it again, but I wouldn't leave the skimmer running as it made a huge mess Next time I'd rather run an airstone in the DT and deal with a small amount of salt creep. The mess from the skimmer overflowing is a big headache to clean up Tomorrow night I will change the carbon again, and the tank will get a 10% WC Friday/Sat as part of my regular routine So, Monday I did a rescape that is not finished yet I'm very happy with how it's turning out, but can't post pics yet as it's not finished, so you'll just have to stay tuned ... ![]() |
#7
|
|||||
|
|||||
![]() I started rescaping the tank Feb 10th, but it's taken me this long to finish it
My reasons for the redo were to make more room for SPS I can see where things will grow now and hope my plans all come together If you look closely enough you'll see where I've remove many rocks from the tops of the burbs Before ![]() After ![]() Last edited by gregzz4; 02-17-2014 at 01:40 AM. |
![]() |
Thread Tools | |
Display Modes | |
|
|