Couple Apex questions....

[ddarkz]

looks like you are on the right track, this is what I found on the google link.

https://discussions.apple.com/docs/DOC-3415

[ddarkz]

the private IP should be your APEX IP address from the last picture though.

Fill in the public ports to whatever the number you want, the private port should be the same as your APEX which is 80, or you can change it from the APEX.

[lastlight]

thanks i'll give that a shot.

[ddarkz]

make sure both public ports are the same #, so is the private ports, but the public and private port# doesn't have to be the same though.

[lastlight]

i need to sort out where my dyndns domain comes into play too but i'm pretty sure the manual explains that well enough. thanks again for the pointers hopefully tonight i can get somewhere with it.

[ddarkz]

np, let us know if you run into other troubles.

[lastlight]

that link you posted (which I had been on before but failed with) does say the private IP field should match the IP address from step 1.

I had tried 10.0.1.6 already but must have done something else wrong. that is the address i'm currently using in my browser to access the controller from inside my network.

[ddarkz]

the goal is to be able to login from your public IP address (with the correct port#).

which means your public IP need to be linked with your APEX private IP somehow, thats the general map you are looking at, the configuration is confusing sometimes, but once you put in the right value you are all set.

Check your APEX display unit, it will tell you what the private IP address is, I'm not sure if the one Apple displayed was a correct one?