Couple Apex questions....

[lastlight]

Here are screenshots of the apex info:





And here is all that seems to be available to me on the apple router:



I think I use the mac address and 10.0.1.6 from the first screen capture in this one but maybe I'm wrong.



This one I really have no idea what to do. Doesn't seem to be a spot where I can say something like "forward port 5900 to 80" or something. This is really not my forte so any help would be appreciated thanks.

[ddarkz]

looks like you are on the right track, this is what I found on the google link.

https://discussions.apple.com/docs/DOC-3415

[ddarkz]

the private IP should be your APEX IP address from the last picture though.

Fill in the public ports to whatever the number you want, the private port should be the same as your APEX which is 80, or you can change it from the APEX.

[lastlight]

thanks i'll give that a shot.

[ddarkz]

make sure both public ports are the same #, so is the private ports, but the public and private port# doesn't have to be the same though.

[lastlight]

i need to sort out where my dyndns domain comes into play too but i'm pretty sure the manual explains that well enough. thanks again for the pointers hopefully tonight i can get somewhere with it.

[ddarkz]

np, let us know if you run into other troubles.

[lastlight]

that link you posted (which I had been on before but failed with) does say the private IP field should match the IP address from step 1.

I had tried 10.0.1.6 already but must have done something else wrong. that is the address i'm currently using in my browser to access the controller from inside my network.