kalkwasser

[Ryanerickson]

Bio pellets are for reducing nitrate and phosphate nothing to do with calcium and alk

[xenon]

Kalk is an excellent way to maintain calcium and alkalinity in a balanced way. The major advantage is that it also increases PH.

Wit that said, there is only so much kalk you can dose when you saturate your top-off water with kalk. If you have a heavily stocked tank (lots of corals) it won't be enough.

You can alternatively blow a fan across the water surface of your tank to evaporate more water so that you can top-off even more but it may still not be enough evaporation to keep up with demand.

I know what some with heavily stocked tanks top-off with kalk and also use a dosing pump. The reason for this is the increase in PH from kalk.

[untamed]

Originally Posted by xenon

Kalk is an excellent way to maintain calcium and alkalinity in a balanced way. The major advantage is that it also increases PH.

Wit that said, there is only so much kalk you can dose when you saturate your top-off water with kalk. If you have a heavily stocked tank (lots of corals) it won't be enough.

You can alternatively blow a fan across the water surface of your tank to evaporate more water so that you can top-off even more but it may still not be enough evaporation to keep up with demand.

I know what some with heavily stocked tanks top-off with kalk and also use a dosing pump. The reason for this is the increase in PH from kalk.

I completely agree. Once CA/Alk demand gets high enough, it becomes really difficult to keep up with Kalk alone due to the limit of how much fresh water you can add along with the Kalk. There are some methods to super-saturate the Kalk...but things get increasingly tricky.

I run my Kalk reactor to the max overnight when pH is lowest and also run a CA reactor.

[xenon]

I personally use a dosing pump to maintain stable cal/alk/mag and also use a CO2 scrubber to maintain a higher PH.

[The Grizz]

I just about have my new system up & running but I'm still a little cofused about dosing. I have a profilux 4 pump slave doser & a good supply of bulk mag/cal as well as Kalk. This is where my confusion lands, alkalinity....... what do you dose for that? Only running a doser nothing else.

[Doug]

Kalk will help maintain alk but not raise it much. You need to dose a buffer like BRS bulk soda ash to raise and maintain alk levels, if your using a doser.

My plan is to use a co2 reactor and kalk reactor both. A co2 calcium reactor is sometimes referred to alk reactor as its very good at maintaining alk levels besides calcium, magnesium and strontium.