![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||||
|
|||||
![]() I was going to add a shallow sand bed this time and already have a coris wrasse.
Lately with my growing clam collection and some nice pieces of chalice, I have been thinking of going bare instead, so I can display my clams on the bottom and my chalice also, which can spread out on the bare glass. Of course I will have to forgo on the leopards and maybe sell the yellow or put a dish of sand in the back for him. The other option is using some shelf rock I have from Eli, just raised of the sand and display the above mentioned on there. All comments welcome please. Thanks
__________________
Doug |
#2
|
||||
|
||||
![]() As with all aesthetic choices there is not a "right" answer, but you did ask for opinions, so...
I would go with sand, and display your goodies on the rock and/or sand. I have seen some beautiful bare bottom tanks but they always have an "arty" feel, more like sculpture than a natural look. I prefer the softer look of sand to the stark look of glass. Just my 2 cents. - Ian |
#3
|
|||||
|
|||||
![]() While there are some awesome BB tanks out there I much rather see tanks with crushed coral or sand
I personally went half of my tank with crushed coral and half course sand gave my fish a choice of where to play and sleep
__________________
![]() |
#4
|
|||||
|
|||||
![]() Thanks for the replies guys. Then my clams would have to go to the rock. I have seen chalice growing on sand but would think it would like bare glass better or flat rock?
__________________
Doug |
#5
|
||||
|
||||
![]() i perfure sand or Crush coral look over bare, but its your tank
|
#6
|
|||||
|
|||||
![]() I understand that but Im not so much discussing bare versus sand, as the placement of clams and chalice. I have a ton of sps to go on the rockwork.
Thanks
__________________
Doug |
#7
|
|||||
|
|||||
![]() I've had bare bottom, sand 3-4 inches and some .5-1 inch sand bed and even crushed coral.
Bare bottom was nice for keeping debris build up low, but I have always enjoyed having a bit of sand. I never believed or bought into the hype of dsb's, but 1-2 inches of sand is a sweet spot, and it's easy enough too suction clean.
__________________
My 265 gallon build! |
#8
|
|||||
|
|||||
![]() Why can't the clams go on the sand? Mine's been on the sand for 4 years and is happy as a, well, you know..
__________________
Brad |
#9
|
|||||
|
|||||
![]() I've started out bare, but I have a favia that is now starting to grow onto the acrylic bottom, which I do not want. It will make it very difficult to move if I let it continue.
I'm probably going to start adding a few cups of well rinsed sand every now and then to give me maybe a 1/2" overall depth. I liked the bare look better than I thought I would. Very easy to keep clean.
__________________
Mitch |
#10
|
|||||
|
|||||
![]() I have a very thin sand layer now in my upstairs tank, as I moved much of it to my downstairs tank that I set up later. And with the water flow, it tends to keep the bottom bare in the front center. And my goby keeps moving it around. It is nice and clean, though.
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101 Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022 Solutions are easy. The real difficulty lies in discovering the problem. |
![]() |
Thread Tools | |
Display Modes | |
|
|