New setup skimmer overflowing week 6

[zv3n]

Originally Posted by BlueTang<3

Have you checked the air intake to ensure its not blocked? My last new skimmer had some packing insulation fall in the intake. Are you using ro water? I had a issue with tap water and my bubble king never went away till I went to ro water. I assume you have the outlet open all the way.

not blocket, ro/di at 0 tds and yes the outlet is fully open. could it be cause of the marco rock.. ?

[intarsiabox]

Originally Posted by zv3n

not blocket, ro/di at 0 tds and yes the outlet is fully open. could it be cause of the marco rock.. ?

I've never had any skimmer issues using marko rock. Have you tried cleaning the skimmer body out with vinegar?

[zv3n]

Originally Posted by intarsiabox

I've never had any skimmer issues using marko rock. Have you tried cleaning the skimmer body out with vinegar?

after 6 weeks in the tank ? i dont know if it will do anything othen then kill the slime no?

[intarsiabox]

Platics and O-rings sometimes have an oil on them that is typically water proof, worth a shot if you are still having issues after 6 weeks. Have you tried contacting SWC directly to see what they suggest?

[zv3n]

Originally Posted by intarsiabox

Platics and O-rings sometimes have an oil on them that is typically water proof, worth a shot if you are still having issues after 6 weeks. Have you tried contacting SWC directly to see what they suggest?

im kinda sure its the water chemistry, if i put my hand in the tank for a bit it stop overflowing and actually goes down 4" under the neck. but then it come back. right now its not overflowing by much... i guess either patience or waterchange.. im il be doing another bigger one this weekend..

[Cal_stir]

My alk got low in my tank because my doser was slipping and my skimmer was overflowing a bit till I got it back up.

[BlueTang<3]

Originally Posted by zv3n

im kinda sure its the water chemistry, if i put my hand in the tank for a bit it stop overflowing and actually goes down 4" under the neck. but then it come back. right now its not overflowing by much... i guess either patience or waterchange.. im il be doing another bigger one this weekend..

I think this is from our skin oils my bubble king takes hours to get the head back after I reach in the tank.

Are you running carbon? Another thought is my skimmer had a ozone port I never noticed and was always overflowing so I only ran 1 pump then I figured out the hole had to be plugged.

[zv3n]

Originally Posted by BlueTang<3

I think this is from our skin oils my bubble king takes hours to get the head back after I reach in the tank.

Are you running carbon? Another thought is my skimmer had a ozone port I never noticed and was always overflowing so I only ran 1 pump then I figured out the hole had to be plugged.

ya well actually my skimmer has a recirculation option in it witch i plugged. now i just put a valve on the air intake and its skimming for now.. but i kinda find it a bit stupid i need to run it not at 100%.. hopefully it will remove what ever is in the water and tomoro morning it will be be better lol.. i just have tons of sps and im worried a bit .. but it is what it is.. im sure it will be fine eventually .. just never taught i could take so long to settle down...

oh and yes im actually runing passive carbon in a mesh AND i got another 150grams of rox 0.8 in a reactor... but that dint help a bit.