Reactor fittings

[gregzz4]

The pic referenced above is for the pic in my original post

[hillegom]

I don't have any reactors so cannot comment on the flow required.
However if you use the reducer, from 1/2 to 3/8 then the flow from the maxijet will be throttled down.

[gregzz4]

The reduced flow is OK to work with
As it stands, I'm using a pair of MJ 600s on my current TLF 150s and have a Tee and valve on each as it's too much flow and the Carbon and GFO would get beat to crap at full flow

There'll be a post in my build after these are running