|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
#1
08-05-2004, 07:34 AM
|
||||
|
||||
Looking for some help
I need to fit a large amount of aquariums in a small space. So i need to build a stand that will hold all of them. There are 5 ten gallons 5 20 gallons 2 25 gallon breeders, 5 33 gallon tanks. I have figured that will but the width side pointing out but i need to build a mulitlevel stand to incormerate these tanks. For lights i am just going to use flouresent bulbs so there needs to b room for those also.
__________________
http://ryandoolittle.tripod.com/ryansdwarframs/ 
|
|
#3
08-05-2004, 06:46 PM
|
||||
|
||||
|
Here i was think something on the lines of this
http://www.canreef.com/photopost/sho....php?photo=968 This is what i am leaning towards what are your ideas on this. Mind you non of these are going to be freshwater and most of them will be run by a either sponge filter or a UG so i can make a side cabinet for all my supplies and stuff.
__________________
http://ryandoolittle.tripod.com/ryansdwarframs/
|
|
#4
08-05-2004, 11:08 PM
|
|||||
|
|||||
|
You can build something like that I looked at the oneat my LFS and it is made of 1" ply-wood and 2x6 just so you have and idea. you would have to take the ply-wood and cut the legs (at least 3) cut holes for the 2x6 in all 3. then you pass the 2x6 trough the holes 1 in fron and one on back so there are each going through the 3 legs. Now you tow nail all the legs into the plywood. After you do that you put a stinger every 6-8" and screw them together (don't nail) these will keet it tight ang give you a place to mount ligting if needed. after that cover the stringers with .5" or .75" ply-wood also put a 2" strip of the 1" ply-wood under the arm that go troug the legs and screw that on. that will be over built enough to hold all the tanks just remember one set of tanks per leg and max 8' tall and as long as you can buy a 2x6 that you can make one peace out of it. hope this will help you out. and one more thing, you will have to paint it with a good primer and bathroom pain or extior paint and seal with clear coat.
|
|
#5
08-06-2004, 12:40 AM
|
||||
|
||||
|
Quote:
__________________
-Quinn Man, n. ...His chief occupation is extermination of other animals and his own species, which, however, multiplies with such insistent rapidity as to infest the whole habitable earth, and Canada. - A. Bierce, Devil's Dictionary, 1906
|
|
#6
08-06-2004, 01:05 AM
|
||||
|
||||
|
Opps thank you Teevee yes non of these are going to be Saltwater they will be for Freshwater. Mainly for Blue Rams, Gold Rams, Cockatoo Cichlids, A Agazzi's Dwarf Cichlids. O yes a larger tank will be set up in the middle for a display tank with schools of Tetras and Disucs.
__________________
http://ryandoolittle.tripod.com/ryansdwarframs/
|
|
#10
08-06-2004, 05:52 PM
|
|||||
|
|||||
|
the best sugestion was the one you are ignoring.
go to home depot and spend 80 bucks on a industreal storage rach that can hold 1000 lbs per shelf with 5 shelves. then if you decide you don't want to raise freshwater fish anymore you have a good storage rack for what ever else you may decide to do. Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
