![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() Got the leak in the overflow fixed and the tank filled with water again. Got the DCS-170 ordered, sand and rocks coming to fill the tank up
http://imgur.com/Urgz1Ue only problem is the overflow is super loud - on my small tank to quiet it up i just used a simple ball valve but it's not working so good on this setup and the slip/slip setup the previous owner was using leaks and constantly drips water at the joints http://imgur.com/LXpLG4O I'm not sure what the best way to go from here is - the stand pipes in both overflows are different sizes and they are siliconed into the bulkhead it looks like and the bulkheads are also silconed to the glass Should i replumb the setup and throw in new bulkheads / standpipes with two separate drains going into the sump or make minor adjustments to what i have?
__________________
27gal Reef |
#2
|
||||
|
||||
![]() Well after all the problems I finally have it all going!
The rock in the tank is just dry rock I got from reefsupplies.ca http://i.imgur.com/4hVq1og.jpg I had the wooden canopy made by Bill - Bills woodworking in Delburn it was a really good price. I had to do a little modification because I didn't plan light placement very well but the end result works good http://i.imgur.com/lLcAsX8.jpg http://i.imgur.com/78RFunr.jpg My Reef Octo- DCs-170 and i re plumped the tank from what i had bought it as so that i could get it dead silent. http://i.imgur.com/NieiRds.jpg
__________________
27gal Reef |
![]() |
Thread Tools | |
Display Modes | |
|
|