Upgrade time !

[RDNanoGuy]

Originally Posted by Craigdillman

Ok that makes sense, Im thinking the mag9.5 pump its rated for 950 probably around 900 ish after head loss and i can dial it back.

I think you will have a little more head loss than that, most setups with the sump in the stand have between 4' and 5' od head pressure. The mac 9.5 will work fine but probably won't give you much room to play with. If you've got the extra couple of bucks maybe get a mag 12.

As for a skimmer all 3 of your choices will serve you well although i personally like the reef octopus skimmers the best. Vertex is a solid well regarded brand also.

As far as the required water height I've found being a bit low is better than too high. As long as the skimmer intake is completely submerged it will work fine. If you find the output splashes too much you can always fit an elbow to point the outflow into the water.

[Craigdillman]

Mag 9.5

Specifications:
Input: 3/4"
Output: 3/4"
Flow Rate at 0' Head: 950 GPH
Flow Rate at 4' Head: 800 GPH
Flow Rate at 6' Head: 760 GPH

So I might be right on the edge with that but would the 12 be over kill? I dont mind the extra money but dont want the pump to be too much?

Mag 12
Specifications:
Input: 3/4"
Output: 3/4"
Flow Rate at 0' Head: 1200 GPH
Flow Rate at 4' Head: 1100 GPH
Flow Rate at 6' Head: 950 GPH

[Craigdillman]

Yea I think Im going to go with the Reef Octopus skimmer probably the 200 version

[mseepman]

I would look at something like this for a return. http://www.reefsupplycanada.com/jeba...rollable-pump/

You can control it and if you need to tee it off later you can up the power and keep your flow healthy. This gives you flexibility.

[FishyFishy!]

If you can, go overkill with GPH and get a DC controllable pump. That gives you lots of options there. You can always throttle them back, which is really nice.

Otherwise if you're stuck on the Magdrives (so am I... I love them) go for the 12 for sure. I had a similar setup with the 9.5 and I easily could have handled more flow.

[Craigdillman]

Yea i think im actually going to go the DC controllable route it gives me more options and for really not that much more money

Thinking of the speed wave 1320gph heard good things about it

'http://www.reefsupplies.ca/online-st...p-1320GPH.html

and it only like 10$ more than the mag 12

[Craigdillman]

Well Not sure if i should be excited about PVC but..... finally all the fittings came in for the plumbing and got all day tomorrow to work on it so here goes nothing... if the return pump should be in on monday like its supposed to i can get a freshwater test outta the way and well on the way to getting this thing going!