![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||||
|
|||||
![]() Noticed I have a crack in my sump. It's located in my ato reservoir, but is only separated by glass inside from the rest of the sump. I can feel it on the outside of the tank, not the inside. The crack is on the backside of the tank and starts on the bottom. The sump is on foam, not sure how this happened, there's nothing there for anything to hit it. It's not leaking so not sure if I should be worried? I'm going to mark it to see if it continues to move.
I can not get this sump out of my stand, without completely emptying the tank so any advice is welcome to prevent a disaster.
__________________
My 180 GL Reef Tank http://www.canreef.com/vbulletin/showthread.php?t=81842 My 55 GL Reef Tank - shut down http://www.canreef.com/vbulletin/showthread.php?t=87764 |
#2
|
||||
|
||||
![]() Can you take a phone pic? Any crack is serious.
|
#3
|
|||||
|
|||||
![]() ![]() I've marked the end of the crack to see if it's actively moving.
__________________
My 180 GL Reef Tank http://www.canreef.com/vbulletin/showthread.php?t=81842 My 55 GL Reef Tank - shut down http://www.canreef.com/vbulletin/showthread.php?t=87764 |
#4
|
||||
|
||||
![]() Weird. If the ato reservoir is empty I'd be inclined to bond a pane of glass on the inside of the crack. Definitely monitor it though. Wow, that's a tough call. Maybe Dave or someone has a better solution.
|
#5
|
|||||
|
|||||
![]() If it moves, glass on the inside won't matter...it's empty right now, manually topping up. Will check in the am, add water and see what happens.
__________________
My 180 GL Reef Tank http://www.canreef.com/vbulletin/showthread.php?t=81842 My 55 GL Reef Tank - shut down http://www.canreef.com/vbulletin/showthread.php?t=87764 |
#6
|
||||
|
||||
![]() The baffles are glass right?
Sent from my SGH-I727R using Tapatalk 4 |
#7
|
|||||
|
|||||
![]() They are.
__________________
My 180 GL Reef Tank http://www.canreef.com/vbulletin/showthread.php?t=81842 My 55 GL Reef Tank - shut down http://www.canreef.com/vbulletin/showthread.php?t=87764 |
#8
|
|||||
|
|||||
![]() I would drain your ato and cut that piece out and put in a new one....then you would know its good and not break and dump water all over your floor
__________________
500G Mixed Reef ![]() __________________________________ Electrician, Electronics Technician, I can help with any electrical questions you might have!! __________________________________ Kevin |
#9
|
|||||
|
|||||
![]() Quote:
http://www.canreef.com/vbulletin/att...0&d=1327595066 There's a pic of the sump on page 3 of my 180 gl build thread, but attached a pic I drew when setting up.
__________________
My 180 GL Reef Tank http://www.canreef.com/vbulletin/showthread.php?t=81842 My 55 GL Reef Tank - shut down http://www.canreef.com/vbulletin/showthread.php?t=87764 |
#10
|
|||||
|
|||||
![]() Bump
__________________
My 180 GL Reef Tank http://www.canreef.com/vbulletin/showthread.php?t=81842 My 55 GL Reef Tank - shut down http://www.canreef.com/vbulletin/showthread.php?t=87764 |
![]() |
Thread Tools | |
Display Modes | |
|
|