Jebao WP25 group buy

[craigwmiller]

Can I get some measurements from the WP-40 output? I'm having an external wavebox built (with a tank) and the wavebox is designed around one of the new WP-40's being inside, with the hole drilled in the tank back wall somewhat critical to make large enough (though without being tooooo large )

I've read 55mm outside diameter, but if I can get someone to confirm that would be great!

Also the long-wise dimensions (with and without the mount).
A few pictures of it sitting next to a tape measure would probably be reasonable enough



Nick - do you think you'll have mine ready when I'm in Kelowna there (July 29 -> Aug 5ish)? (you are in Kelowna, right? )


Thanks!
Craig

[icy.bing]

Thanks Nick, just received my powerheads.

=D

[nrosdal]

Originally Posted by craigwmiller

Can I get some measurements from the WP-40 output? I'm having an external wavebox built (with a tank) and the wavebox is designed around one of the new WP-40's being inside, with the hole drilled in the tank back wall somewhat critical to make large enough (though without being tooooo large )

I've read 55mm outside diameter, but if I can get someone to confirm that would be great!

Also the long-wise dimensions (with and without the mount).
A few pictures of it sitting next to a tape measure would probably be reasonable enough



Nick - do you think you'll have mine ready when I'm in Kelowna there (July 29 -> Aug 5ish)? (you are in Kelowna, right? )


Thanks!
Craig

When i am back in the office i can measure one up for ya and even measure the opening that is on the Marinetech wavebox to give an idea of what size hole might work well(in a few hours).


I can't think of them not being her by mid week next week. So even if things go horribly wrong they will be here in time for you when you are in Kelowna.

[htfn]

Thanks Nick
I've got mine.

[nrosdal]

Glad to hear peoples items are arriving safe and sound. Packed em up as best i could. I was super impressed with the sheet metal lined boxes that Jebao sent them in. My last few batches came in pretty beat up but these had a few crushed corners and thats about the extent of it.

Feel free to post pics/reviews/thoughts here good and bad. One thing to keep in mind is that they can be a bit loud when first getting going. I have found that they always quiet down after a week or so of use.

Please don't forget to review items purchased on our site as it really helps give piece of mind to people that are waffling about buying one. It is very easy just go to www.reefsupplycanada.com and review whatever you bought or follow the link that will be sent after your order is marked as received.

Thanks

[SeaHorse_Fanatic]

So what does everyone think of their new Jebaos?

Would you recommend 2xWP25 or 1 WP40 for a 6' 180g (ish) full reef (mostly LPS)?

Anyone local who has a spare I can try out before I order?

Thanks,

Anthony 604-868-5553

[Reef Pilot]

Originally Posted by SeaHorse_Fanatic

So what does everyone think of their new Jebaos?

Would you recommend 2xWP25 or 1 WP40 for a 6' 180g (ish) full reef (mostly LPS)?

Anyone local who has a spare I can try out before I order?

Thanks,

Anthony 604-868-5553

I love my 2 WP40's in my 6' 100g tank. Definitely not too much flow, and would not recommend the WP25's for a 180 6 footer. And with the controller, you can dial them down under some of the flow type settings. Eventually, I would like to tie them into my Apex.

[The Codfather]

Originally Posted by SeaHorse_Fanatic

So what does everyone think of their new Jebaos?

Would you recommend 2xWP25 or 1 WP40 for a 6' 180g (ish) full reef (mostly LPS)?

Really depends on lay out. I started with 2 40's on the far side, but ended up with 4 25's, one in each corner. I find the 25's a little louder than the 40's, but I have them dialed up a bit more. If I limit them to 92%, I cannot hear them at all. At 100% they seem to whine a bit, definitely a benefit with tying them into my profilux.