calcium up up and away please.

[tang daddy]

What is you magnesium at, correct or make sure mg is at the proper levels then worry about calcium, I was adding tons of mg ca and alk to my tank over the last little while and it was hard to get everything up. Be patient and you can drip calcium in daily with ro as your top off. But be sure the mg is at 1350-1400 and it should be easier.

[daplatapus]

Originally Posted by tang daddy

What is you magnesium at, correct or make sure mg is at the proper levels then worry about calcium, I was adding tons of mg ca and alk to my tank over the last little while and it was hard to get everything up. Be patient and you can drip calcium in daily with ro as your top off. But be sure the mg is at 1350-1400 and it should be easier.

This^^^^^ X1000
Your mg levels will determine how much Ca your water can hold. For my tank I found the magic number was between 1400-1450, but yours may be different.

[Bblinks]

Originally Posted by daplatapus

This^^^^^ X1000
Your mg levels will determine how much Ca your water can hold. For my tank I found the magic number was between 1400-1450, but yours may be different.

100 percent.

[Aquattro]

My first suspect is the test kit or testing method. Lots of new water, adding Ca and nothing that uses it and it's still less than 350? I'm suspicious of that number..

[daplatapus]

When I helped a friend set up their 3rd tank last fall we had similar issues. Ca was low, alk was low Mg was low. She tried dosing all three at separate times of the day for a week. Nothing really wanted to move. I showed her the dosing calculator on BRS's site and we started just trying to get the Mg up to 1300. The dosing quantity recommended didn't raise the levels as much as I had anticipated, but we just kept with the schedule, recalculating every time we dosed. It finally came up to where we wanted it. Then we were able to slowly bring up the Ca and alk. It almost seemed to me like the rock or sand or something was absorbing the chems and until they were at equilibrium with the surrounding water, then the values started to rise.
During the whole process I spent $100's on test kits thinking the same thing. Either test kit or handling errors. Salifert, Elos, API.

I wonder with new tanks and people just starting dosing if some systems need that extra little kick start before much happens or shows up on the test kits.