#1
|
||||
|
||||
newbie needs help
Hi everyone! I'm totally new here. I'm planning on converting my cichlid tank to a fowlr. I've done a bit of basic research and one of my questions is the best way of getting the water temp to match your tank during a water change? I hear it's much more important than in a fresh water tank. I appreciate any advice and am looking forward to be part of the saltwater community!
|
#2
|
|||||
|
|||||
It doesn't have to be spot on. I can't say it's the same for everyone, however with me - I have a controller that turns my heater on when it dips below a specific temperature, and it goes back up to 76F - You can get a heater and put it in the bucket and set it to 76F and let it sit until it turns off, then check the temperature with a thermometer. The water for water changes should be left overnight anyways. That way it allows you to get to the temperature before adding it to the tank.
On a side note, welcome to the dark side! |
#3
|
|||||
|
|||||
haha you have been dying to say that haven't you! lol
Neoh said it best, just get a second heater for your water change bucket and set it to the same as the display tank. |
#4
|
||||
|
||||
Temp is critical. Always match WC water to tank water. Some fish and invertebrates and coral r sensitive to it. It can lead to fish sickness and things goin wonky. Best to start good habits now....
|
#5
|
|||||
|
|||||
The smaller the system the more important temp is. However as long as you're within 2 degrees of what the display temp is then you should be fine. Using a heater in a bucket/mixing tank works well, just make sure to check it as heaters (even on a low setting) can heat up water fairly fast in a bucket.
__________________
One more fish should be ok?, right!!! - Laurie |
#6
|
|||||
|
|||||
I make up water in advance. It's heated and circulated with an pump. Waiting for the next WC.
__________________
I believe Reefkeeping is not a hobby but a way of life It's unfortunate mine is at a stand still! Building a 135 reef 9 years in the making(seem like I'll never get this 1 together! Too Busy with the Nano and Pico tanks |
#7
|
||||
|
||||
im my 125 fowlr i take it from tap into tank i just eye ball it but with finger lol
|
#8
|
|||||
|
|||||
rk why is your tank at a stand still?
__________________
180g reef w 90g sump 3 - EcoTech Radion XR30w G2, 2 - MP40w ES Vertex Alpha 250 & Puratek 100 RO/DI 3 - Fluval E300 heaters |
#9
|
|||||
|
|||||
I had to put it on hold due to room issues. Then Reno costs skyrocketed and before you know it it's 6-7 years. Plus I not in a hurry to build my dream tank.
__________________
I believe Reefkeeping is not a hobby but a way of life It's unfortunate mine is at a stand still! Building a 135 reef 9 years in the making(seem like I'll never get this 1 together! Too Busy with the Nano and Pico tanks |
#10
|
|||||
|
|||||
Ah ok. Like you said it's better to wait and build it how you want.
__________________
180g reef w 90g sump 3 - EcoTech Radion XR30w G2, 2 - MP40w ES Vertex Alpha 250 & Puratek 100 RO/DI 3 - Fluval E300 heaters |
Thread Tools | |
Display Modes | |
|
|