![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() What size of a sump is recomended for a 125 gallon?
__________________
Thousands of years ago, cats were worshipped as Gods. Cats have never forgotten this. |
#2
|
||||
|
||||
![]() I'm looking to upgrade and I am new to sumps from canister filters. Any input is appreciated.
__________________
Thousands of years ago, cats were worshipped as Gods. Cats have never forgotten this. |
#3
|
|||||
|
|||||
![]() canister filters are always rated to a tank size... so that is easy, though always find one rated above your tank. My 125 had an eheim pro3 2080 running on it.
As far as a sump goes, i think the rule of thumb is: as big as you can fit under the tank. I don't think you can over-do a sump. More water the merrier. I would say for that size tank, 30-50 gallon minimum but other than that you could go as large as you want. Im far from an expert so maybe others will correct this post but thats how i would look at it if i was putting a sump on my 125 |
#4
|
|||||
|
|||||
![]() Yup, bigger is better IMHO. I've got a 150 gal sump on my 77 gal DT
![]() |
#5
|
||||
|
||||
![]() no set rule but 50 percent your main tank is always nice. also keep in mind your baffle height will determine how much water is in the sump also
|
#6
|
||||
|
||||
![]() As said before, the bigger the better! At a minimum, you need enough volume that in the event your return pump shuts off (power failure, pump fail..etc.) that the sump doesn't overflow.
|
![]() |
Thread Tools | |
Display Modes | |
|
|