Skimmers, RO/ Tunze 7410/2

[input80]

Hey there Ginu, what is the footprint of the RS100 please ? how old is it ?

[Ginu]

Originally Posted by input80

Hey there Ginu, what is the footprint of the RS100 please ? how old is it ?

The footprint on the website says 8.5" 10" by 20" however it would not fit in my sump area which is 9*10... for some reason the pump was sticking out a wee bit and don't feel like I should mess around changing the sump layout at this moment.

I bought it used and not sure how old it is, but it looks like it was used for a short period of time (approx a year I'm assuming). I can send or post up some pics once I get home today if needed, well I'll post pics anyhow.

[input80]

probably won't work for me either, my chamber is 8"x13" also

[Ginu]

Originally Posted by input80

probably won't work for me either, my chamber is 8"x13" also

I think it would work as I was missing about .5 of a inch due to the pump inlet, you have an extra 2" over my skimmer chamber

I will measure the exact footprint when I get home if you like and post pictures.

[Ginu]

Tunze controllable pump



RS 100 Skimmer measured and by my calculations it will fit in a 11.5" * 8" chamber.



RO 4 stage by Aqua Safe

[Ginu]

Currently running on my 75 with 7 fish.

Less than 24 hours skimmate on the 75G


Also found a Aqua Euro Nano Skimmer $40 - cant find lid and will order a new one

[input80]

Thx for the pics Ginu