How to remove the stand's center brace

[The Grizz]

Ok those are simply exactly what I thought it was, try my method first should work as I have done that to a couple stands for other people.

You can do it.

[Casey8]

Originally Posted by The Grizz

Ok those are simply exactly what I thought it was, try my method first should work as I have done that to a couple stands for other people.

You can do it.

What a big releave, thank you Grizz

[The Grizz]

It a MarineLand stand correct? Just make sure you put the brace back in solid & you will be good to go.

[Casey8]

Yes Grizz, it is a Marineland stand. The new stand is not here yet, but it will arrive in a week or so. I am ready to do it and will follow your instructions.

[jason604]

would removing the center brace make it too weak in the middle to hold the heavy tank?

[Casey8]

Originally Posted by The Grizz

I am guessing that it is a wood stand? It probably is nailed together with brad nails & the hole where filled in before paint. If that is the case use a light hammer & tap the brace from underneith to see if it moves. Once you get it out put in the sump & replace the brace.

Jason, please read his instruction here

[lastlight]

Originally Posted by jason604

would removing the center brace make it too weak in the middle to hold the heavy tank?

most store-bought stands appear to me to be built only as strong as needed. certainly not overbuilt by any means. If they put a centre brace in I wouldn't risk removing it permanently.

[Casey8]

Grizz, I just want to say thank you very much ! I did it

[The Grizz]

Originally Posted by Casey8

Grizz, I just want to say thank you very much ! I did it

Nice job Miss Casey I knew you could get the job done.