![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() your temperature fluctuate too much. Thats 3 degree and I am guessing between day and night. too much.
My temperature stay at 76 day and night. no fluctuation but I use a controller. 82 is quite high.
__________________
_________________________ More fish die from human stupidity than any other disease... |
#2
|
|||||
|
|||||
![]() The most common failure for heaters is in the on position. And with 2 heaters you have just doubled your chances.
I have one tank with a heater, and use my Apex to catch it staying on. The other tank doesn't need a heater, and my chiller keeps the temp under control. Both tanks have a max of 1 degree F variance, which I think is pretty good.
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101 Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022 Solutions are easy. The real difficulty lies in discovering the problem. |
#3
|
|||||
|
|||||
![]() I have 2 heaters hooked up through my Reefkeeper lite unit. The controller is set to turn on one of the heaters at 78.5 and will turn on the other if it drops to 78. The upper point on the controller is set to 81 in case of a stuck on heater. Keeps my temp solid at 79.
|
#4
|
|||||
|
|||||
![]() Quote:
|
#5
|
|||||
|
|||||
![]() The point I was trying to make is with a controller you have "more redundancy". You can set the thermostat on the heaters for a max setting and the controller for a max and min setting. If either were to fail closed hopefully the other would kick out.
|
#6
|
|||||
|
|||||
![]() Oh yes I follow you now. It would be a good idea to calibrate the heater's built-in max using the heat probe from the controller though as multiple heaters will likely not be the same and none will likely match the probe on the controller.
|
#7
|
|||||
|
|||||
![]() Interesting thread. I check my temps almost daily, I have 2 heaters in my 180, both hooked up to my Apex controller. Noticed yesterday, my temp sitting at 76.5. I have another thermostat and checked it as well, same reading. I had turned my heaters up a few days ago, obviously 1 is not working properly at all, but they were both on. I haven't received an alarm on either heater either from the Apex.
|
#8
|
||||
|
||||
![]() Quote:
http://www.jlaquatics.com/info/400/D...+Monitors.html
__________________
Hey! I never "LEFT" the hobby, just doing fresh water now. Which is still listed as part of Canreef if I'm not mistaken. ![]() |
#9
|
|||||
|
|||||
![]() Quote:
No, 86 is quite high (but not fatal)...... For my tanks (20yrs experience) anything between 78 and 82 is perfect ![]() |
#10
|
|||||
|
|||||
![]() Quote:
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|