Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum > Pump Specific

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #13  
Old 03-07-2013, 04:57 PM
sphelps's Avatar
sphelps sphelps is offline
Member
 
Join Date: May 2006
Location: Lyalta, East of Calgary
Posts: 4,777
sphelps is on a distinguished road
Default

I'm still on the fence, everything I read states power companies bill consumers based on real power and not apparent.

Here's a little quote from a website that talked about power factor correction devices and how they don't work for residential.

Quote:
The power factor correction devices are said to improve the second half of the above equation, the Apparent Power. However you don't pay your utility for Apparent Power. You pay them for Real Power (Watts). Apparent Power is defined as the total power in an AC circuit, both dissipated AND returned! (scroll to the bottom of this link to view the power triangle and description of Apparent, Real and Reactive power). This means that if you currently have a poor power factor, your Apparent Power is higher, but all this means is that you are returning more unused electrons to the utility! But since they only charge you for used electrons (dissipated electrons = Real Power = Watts) you don't give a hoot about your Apparent Power!

Let's take an example of 2 completely identical motors sitting side by side. Both of these motors have the exact same efficiency and operate at 1.2 kW. The first motor doesn't have a power correcting device. The second motors does have PF correcting device.

Motor 1: 1.2 kW motor, connected to a 120 V circuit, PF = .7
Motor 2: 1.2 kW motor, connected to a 120 V circuit, PF = .999 (this has the Power Factor correction device, thus the excellent PF!)
Using the equation above we can show the amps (current) that will be dissipated in motor 1:

1.2 kW = .7 *120V * A → A= 14.29

And we can do the same thing for motor 2:

1.2 kW = .999*120V*A → A=10.01

But this doesn't mean you'll pay less to the utility! All this shows as that your power factor increases (gets better) your amperage decreases, but the Real Power (Watts = what the utility charges you) stays the same! Therefore no matter your power factor, in residential settings the utility is still going to show that you took the same amount of Real Power off of the power lines, so that is what you pay.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 01:03 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.