![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||||
|
|||||
![]() Looking for an inexpensive 10lb tank (or 2), regulator and needle valve.
I'm looking to spend as little as possible ideally, but the tank can be crusty/rough looking, as long as the reg doesn't leak and it's got at least a couple years before the next hydrostat test needs doing. I can be reached at 778-322-6331 Thanks! Renee |
#2
|
||||
|
||||
![]() Just so you know the hydrostatic test is cheep $~20
__________________
250G DD LED SPS R.I.P. 180G LED SPS 80"x36". 300G custom build Owner of Mountain Ridge Heating and Gas Class A gas fitter, HVAC |
#3
|
|||||
|
|||||
![]() Yup, just picked mine up from getting done. $18
|
#4
|
|||||
|
|||||
![]() Ha! I wasn't thinking the cost so much as if it was too crusty so to speak, it not passing the test
![]() |
#5
|
|||||
|
|||||
![]() If the tank is iffy looking or 'older' they can recommend every year it be tested than every what 3 or 5 years. What happened in my case.
|
![]() |
Thread Tools | |
Display Modes | |
|
|