MP10 Questions

[gregzz4]

Mike, I initially had trouble setting mine up as I wasn't following the instructions closely enough
I was holding buttons when I was supposed to just press them
Once I got that sorted out all went well

BTW, are your Ws lit up ?

Good luck

[ensquire]

Originally Posted by gregzz4

I was holding buttons when I was supposed to just press them
Once I got that sorted out all went well

BTW, are your Ws lit up ?

Good luck

Yes both are now since I swapped in other Wireless model after first post

[Arok3000]

Originally Posted by ensquire

Yes both are now since I swapped in other Wireless model after first post

I was going to ask, but thought it would be too obvious a mistake that only someone like myself could make. I guess these things happen!

[gregzz4]

I had to point it out as I bought used units that were supposed to be Ws, but were not

[ensquire]

Originally Posted by gregzz4

I had to point it out as I bought used units that were supposed to be Ws, but were not

Thats my story as well, thought all were Wireless and were bought as such .

[ensquire]

Thanks Greg, for your help.
Simple solution to this problem and a lesson to read instructions to the letter.

The instructions are to simply press the mode button while in set up menu rather than press and hold. Worked perfectly and now have two units communicating as they should.
People on this board are so helpful...........
Thanks to all that replied..

[gregzz4]

Glad to hear they work

Men and instructions ....