50 Gallon Waterfall Lagooooon

[FishyFishy!]

Originally Posted by sphelps

I kind of assumed it was one big manifold. Either way I think you'll need that valve there in order to better control the feed line for the water falls, reason being is you'll probably have to restrict it a little to make enough of a pressure difference to send water up the feed line which is higher than the tank.

Yeah that makes sense. I have two pretty overkill return pumps to choose from, so I will have to dial back the pressure to the main return anyways. The other manifold valves will be for the reactors and the waterfall line for sure, and possibly a UV and another fuge tank thats in the works. So it will need to have a lot of pressure in it.

I have a Mag 12 and a Mag 24 for this build, one will be used for the mixing station, and one will be used for the return. So I'm going to start by using the Mag 12 for the return to start, and if it's not enough, then I'll switch to the Mag 24. I think the 12 at 1200 GPH shouuld be more than enough. It's only rising about 4 ft to the tank. But at least I have the option.

Keep the picking coming tho! I want this build to be a good one.

[FishyFishy!]

So thanks to steve, I now have a good first skimmer sump, so the layout has changed. I am also adding a 50 gallon live rock sump on a new top shelf. The layout has changed to this:



I'm not sure where to but the DSB and cheato fuge though. Should I put it in the 20 gallon tank on the middle shelf (right) or in the main sump in the middle chamber? (see yellow arrows for locations)

[FishyFishy!]

Also, I want a frag tank in the middle of all this craziness. My original plan was to have the DSB and cheato in the middle chamber of the bottom sump, and the 20 gallon on the right as the frag tank. Now that I have the dedicated live rock/water change tank on the top shelf, I have lots of space left over for other things. What should I dooo??

[sphelps]

Frag tank in the tank next to the skimmer and fuge in the lower sump. That's what I would do.

[FishyFishy!]

Originally Posted by sphelps

Frag tank in the tank next to the skimmer and fuge in the lower sump. That's what I would do.

Yeah that was my first thoughts for sure. Thanks again!

[Shifty203]

Sorry if I missed it, but how are you controlling Humidity in this room? That's alot of surface area with all 4 tanks. Your evaporation rate for that small of a display tank is going to be insane.

[FishyFishy!]

Originally Posted by Shifty203

Sorry if I missed it, but how are you controlling Humidity in this room? That's alot of surface area with all 4 tanks. Your evaporation rate for that small of a display tank is going to be insane.

The support system is going to be used for a larger system in the very near future, so the display will only be temparary.

The humidity will be controlled by an exhaust fan in the hole you see in the wall on the left hand side of the closet (next to the skimmer tank). This leads right outside to vent humidity. I also have a large de-humidifier in the room that the closets are in.

Eventually I will install an HRV, but until the day money grows on trees, the humidifier and the exhaust fan will have to do!

[kien]

Originally Posted by FishyFishy!

Yes... there are HUGE other issues around the world... but thats really not relevant here at all.

How many tangs do you have in your 20 gallon Nano? NONE... because you have the common sense and decency not to do something silly.

This coming from a guy who's about to stuff a VOLCANO into a 50g.. Have you no decency man! That poor volcano :-(

[FishyFishy!]

Originally Posted by kien

This coming from a guy who's about to stuff a VOLCANO into a 50g.. Have you no decency man! That poor volcano :-(

BAAHAHAHAHAHAHAHAH

It grew there naturally.......I SWEAR!

[Arok3000]

Do you have any idea how much swimming room those volcanoes need? Also they grow extremely fast so you'll need to upgrade in a couple of weeks time.

Setup looks sweet right now, can't wait to see the finished product!

One question, I may have missed it, are those brute containers directly above each other? It seems like accessing the bottom one might be a little difficult.