Blue LED strip

[ashr]

hey all

Looking to add a 32-39" blue LED bar/strip to the tank for night viewing. I have had the Hamilton Blue LED Lighting Strip from J&L before but the salt water destroyed it and almost fried my tank.. so i don't want to buy that one again.

I'm looking for one that is not to $$$ but works great.
Does anyone have one they can recommend?

[mrhasan]

You might want to grab this:

http://www.ebay.ca/itm/Aquarium-440-...#ht_1700wt_919

Or you can get an RGB strip:

http://www.ebay.ca/itm/RGB-3528-LED-...2fb5f70&_uhb=1

[ashr]

Awesome!
I didn't really want spend 70.00 on one haha


Thanks

[RuGlu6]

You can try one of these, may be good for night viewing
http://www.aquatraders.com/LED-Subme...22-p/56222.htm

I got similar strips (link from previuos post) but from from Onstatetechnologies fall in to the tank and it was in water for more then an hour it it was ok because its waterproof. Mine are 470Nm.
http://www.ebay.ca/itm/Aquarium-440-...#ht_1700wt_919

RGB noted above are Not waterpoof.

[cyberdude47]

I've got a 36" strip that I bought I'll sell. Cost me $70 and I never used it. Ill sell for $50

[cyberdude47]

http://www.liteline.com/product.php?...LED-STR-12-RGB
There's a link if your interested, but the one I have is a straight royal blue not the color changing

[mike31154]

+1 on the 5 meter reels of strip lights you can get off ebay. Can't beat the price & many of the RGB reels are available with the controllers, remotes & power supply. Only down side is you need to wait a while to get 'em. Pretty sure manufacturers use the same reels to make the small aluminum fixtures & T8 fluorescent tube LED replacements you find that are way marked up in price. Same SMD chips. You can cut them at every 3 LEDs without altering the voltage required to run them, typically 12 volt DC. I've ordered a couple of reels myself for various purposes, including possible Xmas lighting. I think sphelps has a reel for sale. You just need to be careful which kind you order. There are different kinds of LEDs, different density (more or fewer LEDs per meter) varying degrees of waterproofing or non water proof. 5050 Leds are a good choice since they're fairly bright although the 3528s would probably suffice for night lighting. There are also some double row reels available & newer ones with even brighter 5630 & 7070 SMD LEDs. Won't be long & they'll have something we can use as primary lighting for our reefs. I also found a site that sold the aluminum extrusion material with covers & clips so you can build your own little fixtures, but didn't save to favourites & no longer have it. Must search.

sphelps FS thread
http://www.canreef.com/vbulletin/showthread.php?t=91185