![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() it's an error-re read the directions.remember to fill up the syringe to the 1.0 mark with test water then only dispence1/10 of it
|
#2
|
|||||
|
|||||
![]() Did you retest by chance?
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD ![]() TOTM Fall 2013 |
#3
|
|||||
|
|||||
![]() My Hanna Calcium checker is fussy. I'm having a hard time with it. It routinely tests high. Not as high as what the values you're getting, but high. My ELOS and Seachem calcium tests agree with each other, while my checker is often 50ppm higher for some reason.
I would test again with the checker, and if the values are still high, have your LFS or another reefer check the values for you (or, purchase a reliable titration test). |
#4
|
|||||
|
|||||
![]() I tested the new salt water mix again, 600ppm. then I checked with a bottle of seachem refrence fliud(470ppm) and the hanna shows 585ppm. hmmmmm not what I expected with a new hanna ca meter. I will try to see one of the LFS will test for me after work today and report back when I find out.
|
#5
|
|||||
|
|||||
![]() I just made 3 five g pails full with a new tub. I will check later today
__________________
Doug |
#6
|
||||
|
||||
![]() Quote:
|
#7
|
|||||
|
|||||
![]() First bucket....420ppm...1.023
Second....360ppm...1.025 Third...490ppm....1.040 or so. Three cups of salt versus two. All Salifert. They have no calcium added. Usually I add a teaspoon. They do have 3 tablespoons of magnesium. No rolling of bucket. so perhaps different later. This was from the top.
__________________
Doug |
#8
|
|||||
|
|||||
![]() My last 3 batches ( to finish the bucket off ), and it was rolled before opened
All tested @ 79f and 1.025 after approx 18hrs of mixing 11 dKH and 410 Ca 10.5 and 420 10 and 450 I'm curious to find out what the next bucket will give me |
![]() |
Thread Tools | |
Display Modes | |
|
|