![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() We may be on the wrong track here, but ...
Was your doser set to run sometime before you noticed the clouding ? If so, I'd suggest you test your Alk and Ca tonight to see if either are high - just to rule it out Has it cleared since you started this thread ? |
#2
|
|||||
|
|||||
![]() I have the alk set to start dosing in the evening (5 pm) and mag starts in the morning (8 am).
It has not cleared at all since I started the thread, I will test calcium and alk and post. |
#3
|
|||||
|
|||||
![]() Alk is 6, ca 440. Water is starting to clear a bit but hard to tell with lights off.
|
#4
|
|||||
|
|||||
![]() Hmmm, I'm certainly no expert, but I didn't think alk would precipitate with just 440 Ca. Like Greg said we may be on the wrong track.
|
#5
|
|||||
|
|||||
![]() It was higher at 460 earlier. The cloudiness happened fast. Will test again in the morning. Going to mix some new salt water now and do a water change tomorrow night. I've got an algae outbreak that started earlier this week, diatoms and cyano, last water change was Thursday last week.
|
#6
|
|||||
|
|||||
![]() Hopefully someone more versed will speak up ...
From what I understand, if you have too much Ca, it will precipitate at higher levels of Alk, higher than yours. Say, around Alk 8.5+ or even more. I could be talking out of my butt here, so don't take this to be any kind of solid advice, as I don't even know if a dose of Ca could cloud your water Just thinking it could be a dose of Ca that the water column couldn't absorb, so you have precipitate ? You'd know tomorrow as it will coat some of your hardware ... Anyway, I doubt it's an issue of dosing/params with your Alk hovering around 6 Must be something the critters did ( jiggy jiggy ) |
![]() |
Thread Tools | |
Display Modes | |
|
|