![]() |
#21
|
|||||
|
|||||
![]() Before you do that, just try the extended hose thing ....
Sure, you can add redundancy to the system later, but it will work with the setup you have |
#22
|
|||||
|
|||||
![]() ...or you could run your ATO feed line into a piece of pvc that runs from a higher level down into the sump. This will raise the level of your output above the water level in your reservior. Siphoning problem solved and no need to extend the tubing.
Last edited by Mandosh; 07-25-2012 at 06:35 AM. |
#23
|
|||||
|
|||||
![]() I could see that working
__________________
Guide to building super awesome rock structures / my tank journal http://www.canreef.com/vbulletin/sho...d.php?t=116410 |
#24
|
|||||
|
|||||
![]() Hope you figure it out and glad your kid was home playin' games
![]() PM me if you have any questions .... |
#25
|
|||||
|
|||||
![]() Feeling pretty Homerish right now.
![]() Moved ATO hose to the top of the Reservoir which actually overhangs the sump a bit. Works as it should but because of the height it is noisy, Will add a short piece of larger diameter hose to get it down to a quieter level..... Thanks for all the input ........... DOHHHHHHHHHHHHHHHHH Quote:
__________________
Mike 36 Gallon Saltwater http://www.canreef.com/vbulletin/showthread.php?t=72283 90 Gallon Slow Build http://www.canreef.com/vbulletin/showthread.php?t=82824 |
#26
|
|||||
|
|||||
![]() Yes for once I wasn't upset that he was inside on a hot sunny day LOL
__________________
Mike 36 Gallon Saltwater http://www.canreef.com/vbulletin/showthread.php?t=72283 90 Gallon Slow Build http://www.canreef.com/vbulletin/showthread.php?t=82824 |
#27
|
|||||
|
|||||
![]() Quote:
I never hear it now, just the pump, and no more splashing all over either |
#28
|
|||||
|
|||||
![]() So on the siphoning issue..... Would a small in-tank anti-siphon hole work? Like this?
![]()
__________________
![]() They call it addiction for a reason... |
![]() |
Thread Tools | |
Display Modes | |
|
|