RODI problems

[FragIt Dan]

Yeah, it may be two or more stages at the same time if you end up with no filters and still no flow you can at least rule them out. This is what I expected to happen, but found it was one of my almost-new 5 microns plugged in just a day of use (incoming TDS only ~12ppm). I spent a lot of time doing other troubleshooting with the supplier as well. Good luck, I'm curious to hear what you find out,
Dan

[MKLKT]

Originally Posted by FragIt Dan

Yeah, it may be two or more stages at the same time if you end up with no filters and still no flow you can at least rule them out. This is what I expected to happen, but found it was one of my almost-new 5 microns plugged in just a day of use (incoming TDS only ~12ppm). I spent a lot of time doing other troubleshooting with the supplier as well. Good luck, I'm curious to hear what you find out,
Dan

This is a good idea, try with no filters inside and check the pressure, then add one and test (repeat), working in one direction to try and isolate the area where the blockage is occurring.