Fired up for some tests and I'm pleased with the colour, and a big improvement from the 50:50 Cree's used previously. All I need to do is find the right settings that will allow me to take some pictures of the tank and fixture at the same time.
All of the pics are either overexposing the fixture or underexposing the tank, not to mention the white balance.
Here is the MDF version before I tear it all down again to start on the acrylic.
I've managed to clear up a lot of room mounting everything into the fixture, and eliminated a few power cords as well. The fixture will have a standard C-13/C-14 connection, but I will need to order a locking cord to prevent an unintentional dip in the tank.
The cooling fans are shutting off after several minutes of running and I've identified the relay as the cause of the problem. The vendor is sending a replacement at the moment since this is a rare occasion where I only ordered a single unit. I'm hoping that it is just a faulty relay. Still waiting on what I'll be using for moonlights to arrive as well.
The 2x4 sand will not be in the final design...will be working on some mounting brackets, and maybe a hanging kit....still haven't decided.
04-30-2012, 04:03 AM
Threaded Mode
