Josh's 60G True Cube

[bauder1986]

Originally Posted by The Grizz

Do a mini version of my LED, I am getting much better growth with the LEDs then I ever did with 4 - 250w MH & 4 - 54w T5's.

Well if I were to go like that I would probably use a 1/4 of what you used. If we run those numbers this is what it looks like

LEDS
5 - Cool White HEW
5 - Nautural White HEW
4 - CW XPG
2 - Red
2 - Green
8 - Royal Blue
8 - Blue

OPTICS
18 - 45 Degree
42 - 60 Degree

DRIVERS
3 - 38w
2 - 50w
2 - Mean Well ELN-60-48D

CONNECTOR WIRES
7 - start/end
? - 2"
? - 4"
? - 12"

FANS
2 - 120 mm fans
1 - splitter wire
1 - fan connector
1 - fan power supply

CONTROLLER
Dimmers for now with timers

But for the future

ProfiLux 3 or II ex with 3 EVG Controllers

HEAT SINK
18" x 18"



..........Actually......Drooool. That is awesome but I would be running the MH for a lot longer then I hoped just so I can save the money to do this set up.

[The Grizz]

Originally Posted by bauder1986

Well if I were to go like that I would probably use a 1/4 of what you used. If we run those numbers this is what it looks like

LEDS
5 - Cool White HEW
5 - Nautural White HEW
4 - CW XPG
2 - Red YOU WILL ONLY NEED 2 COMBO BOARDS WITH 1 RED & 1 GREEN ON EACH BOARD
2 - Green
8 - Royal Blue
8 - Blue

OPTICS
18 - 45 Degree
42 - 60 Degree

DRIVERS ONLY NEED 3 DRIVERS PLUS A MOON LIGHT DRIVER FOR RED/GREEN
3 - 38w
2 - 50w
2 - Mean Well ELN-60-48D

CONNECTOR WIRES
7 - start/end
? - 2"
? - 4"
? - 12"

FANS
2 - 120 mm fans
1 - splitter wire
1 - fan connector
1 - fan power supply

CONTROLLER
Dimmers for now with timers

But for the future

ProfiLux 3 or II ex with 3 EVG Controllers

HEAT SINK
18" x 18"



..........Actually......Drooool. That is awesome but I would be running the MH for a lot longer then I hoped just so I can save the money to do this set up.

With a cube you run all your blues off one driver & all whites off another driver. Red/Green on a moon light driver & high noon kit on a special wattage driver.

[bauder1986]

Originally Posted by The Grizz

With a cube you run all your blues off one driver & all whites off another driver. Red/Green on a moon light driver & high noon kit on a special wattage driver.

Ok and the high noon light are the XPG'S right?

[bauder1986]

But if I am Understanding you correctly this is what you sudgest?

LEDS
5 - Cool White HEW
5 - Nautural White HEW
4 - CW XPG
1 - Red
1 - Green
8 - Royal Blue
8 - Blue

OPTICS
18 - 45 Degree
42 - 60 Degree

DRIVERS
1 - 75w(Cool Whites and Nautural White)
1 - 120w(Blue and Royal Blue)
1 - Moonlight Driver
1 - Mean Well ELN-60-48D (High Noon?)

CONNECTOR WIRES
4 - start/end
? - 2"
? - 4"
? - 12"

FANS
2 - 120 mm fans
1 - splitter wire
1 - fan connector
1 - fan power supply

CONTROLLER
Dimmers for now with timers

But for the future

ProfiLux 3 or II ex with 3 EVG Controllers

HEAT SINK
18" x 18"

[The Grizz]

Yes high noons are the Cool White XP-G's

Originally Posted by bauder1986

But if I am Understanding you correctly this is what you sudgest?

LEDS
5 - Cool White HEW
5 - Nautural White HEW
4 - CW XPG
2 - Red / Green combo board
8 - Royal Blue
8 - Blue

OPTICS - no optics on red / green
28 - 45 Degree For whites
32 - 60 Degree for blues

DRIVERS
1 - 75w (Cool Whites and Nautural White)
1 - 75w (Blue and Royal Blue)
1 - Moonlight Driver ( reds / greens )
1 - Mean Well ELN-60-48D (High Noon?)

CONNECTOR WIRES
4 - start/end
? - 2"
? - 4"
? - 12"

FANS
2 - 120 mm fans
1 - splitter wire
1 - fan connector
1 - fan power supply

CONTROLLER
Dimmers for now with timers

But for the future

ProfiLux 3 or II ex with 3 EVG Controllers

HEAT SINK
18" x 18"