Vertex Pro-Bio Pellets

[reefme]

Originally Posted by jagermaier

What size pump are you using?

TLF reactor with mj1200.

[jagermaier]

Originally Posted by reefme

TLF reactor with mj1200.

mj 1200 should work as long as you did not overfill your reactor with pellets

[reefme]

Little below halfway.

[jagermaier]

Originally Posted by reefme

Little below halfway.

I've been running my pellets now for 8 months and I still only have my reactor 1/3 full, you might want to start less pellets and that should also help your tumble rate. You may need to soak them a bit longer as well.

[reefme]

Originally Posted by jagermaier

I've been running my pellets now for 8 months and I still only have my reactor 1/3 full, you might want to start less pellets and that should also help your tumble rate. You may need to soak them a bit longer as well.

Thanks!! Will do.

[jagermaier]

One other thing, make sure you did not get any pellets in the tube when you were filling your reactor as that would restrict your water flow as well.

[The Grizz]

I found that I had to use a bigger pump the a mj 1200 when I was using a TLF reactor. Did you remove the foam & do you have the outlet from your reactor really close to you skimmer intake?

[reefme]

Originally Posted by The Grizz

I found that I had to use a bigger pump the a mj 1200 when I was using a TLF reactor. Did you remove the foam & do you have the outlet from your reactor really close to you skimmer intake?

Why is the outlet from a reactor have to be really close to you skimmer intake?