![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||||
|
|||||
![]() Hey Guys,
I started running Vertex bio pellets 4 weeks ago today...My system is 90 display and a 40b sump, I'm thinking about 120 ish total water volume. I started with 250ml's and haven't noticed any difference in this time, so I'm considering adding another 100 ml's. To soon? or should I be fine....I know I started on the low end for the amount but I just wanted to stay on the safe side. Thanx, Chris
__________________
90 Gal mixed reef with a custom 40 gal sump, SWC Mini S skimmer, 8X56 Watt fan modded Tek, 2x2LF reactors, mag 12 return, Tunze ATO and a modded Tunze 6100 running on a DIY wave controller My TOTM thread http://www.reefersparadise.com/smf/i...?page=page4263 |
#2
|
|||||
|
|||||
![]() Very slow and steady with NP pellets. After 4 weeks you should be good to add a little more. What are your levels like?
You should be sure of your system volume, for most people you can subract 1/3 of the display volume for live rock and sand, plus your sump is most likely half full... Better to estimate low then high, also how much of a biol load do you have? |
#3
|
||||
|
||||
![]() I up mine once a month. I started with half a cup in my 150, up to 2 cups now, I'm seeing a great difference already. 2 cups to go. Good luck!
|
#4
|
||||
|
||||
![]() Oh and I'm going up by half a cup at a time, monthly.
|
#5
|
|||||
|
|||||
![]() I'd say I have a medium bio load (2 small tangs, 2 clowns, clown goby, manderin goby, high fin goby, sail fin blenny)
As for my levels...trates are undetectable and unfortunately my phosphate kits ran out.
__________________
90 Gal mixed reef with a custom 40 gal sump, SWC Mini S skimmer, 8X56 Watt fan modded Tek, 2x2LF reactors, mag 12 return, Tunze ATO and a modded Tunze 6100 running on a DIY wave controller My TOTM thread http://www.reefersparadise.com/smf/i...?page=page4263 |
#6
|
|||||
|
|||||
![]() So ruffly 100ml's a month? did you use a bacteria booster of some kind?
__________________
90 Gal mixed reef with a custom 40 gal sump, SWC Mini S skimmer, 8X56 Watt fan modded Tek, 2x2LF reactors, mag 12 return, Tunze ATO and a modded Tunze 6100 running on a DIY wave controller My TOTM thread http://www.reefersparadise.com/smf/i...?page=page4263 |
#7
|
||||
|
||||
![]() 100mL should be fine. No I didn't use any buffer.
|
#8
|
|||||
|
|||||
![]() Maybe 50 ml now and another 50 ml in 2 weeks....
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#9
|
||||
|
||||
![]() Your more than likely at about 90 gal of water volume
I would say after 4 weeks your good to add more ..... But if your Nitrates are Undectsble why do you feel you need to add more?
__________________
250G DD LED SPS R.I.P. 180G LED SPS 80"x36". 300G custom build Owner of Mountain Ridge Heating and Gas Class A gas fitter, HVAC |
#10
|
|||||
|
|||||
![]() Quote:
The other reason I wanted to run pellets is from my understanding they produce food that your corals will consume...and well I was hoping it might help enhance my SPS colors.
__________________
90 Gal mixed reef with a custom 40 gal sump, SWC Mini S skimmer, 8X56 Watt fan modded Tek, 2x2LF reactors, mag 12 return, Tunze ATO and a modded Tunze 6100 running on a DIY wave controller My TOTM thread http://www.reefersparadise.com/smf/i...?page=page4263 |
![]() |
Thread Tools | |
Display Modes | |
|
|