![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Thanks guys and gals for your input on the spa-flex it turned out to be 11/4" and had to replace it with the right 11/2" witch fit tight now,Process is going a little slower than I expected and during all the cutting and moving a couple of rain barrels I sprung a leak that I had to clean about 75glns out the basement
![]() ![]() ![]() here are few photos of what is done so far. 50 feet roll of 1.1/5" spa-flex ![]() Left side untouched ![]() Cut out of the right side ![]() ![]() Inside the aquarium room showing one shallow frag tank and on its right will have another 60glns frag tank to. ![]() Full wall photo with the cut-out covering the 180glns ![]() |
#2
|
|||||
|
|||||
![]() upgrade been coming slowly,as of now I have all tanks up and running except for the 240glns witch I will start filling it tomorrow then aquascape then lighting then finishing the stand...
![]() A little more info. here is a photo of the heart and main arteries going from the pump distributed to all the tanks ![]() Here it is again attached to the pump ![]() And now into the sump ready for power ![]() ![]() I will have few more photos tomorrow with it all cleaned up. I just finished aquascaping the 180glns (what a big pain to remove all remaining corals and 350lbs of rocks to replace most of it back (wow i sure don't recommend re-aquascaping any setup with so much rocks) I must say that I lost none of the fish or all my corals but I sure do need to bring in more corals for filling the tank again... |
Thread Tools | |
Display Modes | |
|
|