Squire's 90 Gallon Build, Now With Salt Water

[ensquire]

Originally Posted by The Grizz

I would suggest to raise the the tee so that the top of the 90 degree elbow is about 1/2" below the bottom of the egg crate. Take the tee & cut off some of the top & bottom of it so there is only 1/2" of the slip in section left. Also cut down the top reducer so that it is flush in the top.

The problem with that is that it is awful tight in there and if i go any higher with the tee and 90, I won't have enough clearance for the return. As it is I have to use flex hose off the 90 on the return to the bulkhead.
I'll play with it and see what i can fit in there.. might have to break out the KY