Our first SW tank - 180 gal build

[reefgirl189]

Originally Posted by Ryan

Looks good! Cant wait to see this tank at full potential!

I have sealed wooden enclosures for my snakes with Varathane Diamond Coat. Its always held up well against split water dishes so I cant see why it wouldnt work with this. Its available at home depot and comes in many different shades.

How much room in there between the side walls and the glass? Same with the rear walls and the glass?

Just wondering if there is enough room for magnets for the powerheads is all.

Hey what kind of snakes do you have? I used to breed ball pythons and cornsnakes. I love snakes.

And as for the clearance behind the tank for magnets and such.. Yes, there is enough room on either side for a magnet for a Koralia or Tunze. I can't get a vortech powerhead unless I want to put it on the front pane of glass (no thanks). I also have just enough clearance to put cords behind and on the sides of the aquarium. It's very tight.

[reefgirl189]

Here's the new aquascape:

[IMG][/IMG]

And the new sump room. Not running yet as we are waiting for plumbing glue to cure after fixing one leak (Better safe than sorry):



Our one lonely clownfish:

[IMG][/IMG]

And a FTS:

[IMG][/IMG]

[lockrookie]

looking great good job

[globaldesigns]

Looks Great, but I do have a concern, maybe someone else can validate.

Originally Posted by reefgirl189

It looks like you have ABS elbows (black parts at top of photo) with PVC piping. Is this so? I do not think you can glue those 2 together successfully, as the glues for each are different. Can anyone else validate my claim, if this is the case?

[reefgirl189]

Originally Posted by globaldesigns

Looks Great, but I do have a concern, maybe someone else can validate.



It looks like you have ABS elbows (black parts at top of photo) with PVC piping. Is this so? I do not think you can glue those 2 together successfully, as the glues for each are different. Can anyone else validate my claim, if this is the case?

You are right. ABS and PVC should generally not be used together however this is a non pressurized line and we used a cement that bonds to both plastics. It is safe in this case. We consulted a plumber friend of ours because our local plumbing supply store was sold out of the PVC fittings we needed and we didn't want to wait the extra 7-10 days to bring in the elbows.

[globaldesigns]

Originally Posted by reefgirl189

You are right. ABS and PVC should generally not be used together however this is a non pressurized line and we used a cement that bonds to both plastics. It is safe in this case. We consulted a plumber friend of ours because our local plumbing supply store was sold out of the PVC fittings we needed and we didn't want to wait the extra 7-10 days to bring in the elbows.

Cool, good to know. What glue do you use?

[Coralgurl]

That looks fantastic! Love the sump in the basement too. Fish list?

Btw, we just got a ball python, I do not love it....

[ensquire]

Originally Posted by globaldesigns

Cool, good to know. What glue do you use?

Transition glue I do believe