LF Inventronics 150Watt Dimmable Driver Edmonton

[reefme]

Here is the link for a fixture i bought:

http://www.aquatopled.com/mm5/mercha...t_Code=AQ300W0

[reefme]

Hi Martin,

Can I go with 2 of these:

http://www.modularled.ca/inventronic...a-120w-driver/

[eli@fijireefrock.com]

From doing a quick reading (aquatopled, Bridgelux and Epistar)
your array is running at 50% of its capacity I wouldn't suggest running it hygher as I am not to sure about Bridgelux and Epistar LEDs.
So to say your leds are rated at 6w but in actual running at 600 to 700ma
That said I think what Martin is offering is good for your array.

[reefme]

Originally Posted by Elias@caco3reef.com

From doing a quick reading (aquatopled, Bridgelux and Epistar)
your array is running at 50% of its capacity I wouldn't suggest running it hygher as I am not to sure about Bridgelux and Epistar LEDs.
So to say your leds are rated at 6w but in actual running at 600 to 700ma
That said I think what Martin is offering is good for your array.

Ya I just want to make sure 96W is enough or should I get the 120W

[The Grizz]

Personally if it was me I would get the 120w just to be on the safe side.

[reefme]

Originally Posted by The Grizz

Personally if it was me I would get the 120w just to be on the safe side.

That's why I was looking for 2 150W to make sure that I have enough power to drive that sucker. One thing it is worry me is 630mA and I am getting a 700mA driver.

[The Grizz]

If the old one is 630mA & you go with the 700mA your good to go. As it is you don't use 700mA with the old drivers.