LF Inventronics 150Watt Dimmable Driver Edmonton

[reefme]

Originally Posted by martinmcnally

Yea you would need to know the current that they require. It may be more than 700mA. I think you would need to contact the manufacturer for that or look at the existing driver for current information.

Ya why don't I look at the driver itself. Thanks Martin.

[reefme]

Open it this afternoon all I see is a piece paper sticker say 80 - 130v and 630mA. So will 700mA works?

[martinmcnally]

Originally Posted by reefme

Open it this afternoon all I see is a piece paper sticker say 80 - 130v and 630mA. So will 700mA works?

Yea it should work. This one would be your closest match: http://www.modularled.ca/inventronics-700ma-96w-driver/

[reefme]

Originally Posted by martinmcnally

Yea it should work. This one would be your closest match: http://www.modularled.ca/inventronics-700ma-96w-driver/

inventronics-700ma-96w-driver good for 24 to 44 LEDs at 3W each. But mine is 25 0f 6W each?

[eli@fijireefrock.com]

Originally Posted by reefme

inventronics-700ma-96w-driver good for 24 to 44 LEDs at 3W each. But mine is 25 0f 6W each?

I could try and help you out, do you have any information on the type, model number or maybe where you bought your 6w LEDs

[reefme]

Originally Posted by Elias@caco3reef.com

I could try and help you out, do you have any information on the type, model number or maybe where you bought your 6w LEDs

Bought it at Aquatopusa. It is a LED light fixture.

[reefme]

Here is the link for a fixture i bought:

http://www.aquatopled.com/mm5/mercha...t_Code=AQ300W0

[martinmcnally]

Originally Posted by reefme

inventronics-700ma-96w-driver good for 24 to 44 LEDs at 3W each. But mine is 25 0f 6W each?

Yes the LEDs are capeable of 6W each but that would be running them at full capacity most-likely 1A or 1.5A.

That 96w driver is comparable to the specs you quoted. Perhaps are there two drivers inside the fixture?

[reefme]

Originally Posted by martinmcnally

Yes the LEDs are capeable of 6W each but that would be running them at full capacity most-likely 1A or 1.5A.

That 96w driver is comparable to the specs you quoted. Perhaps are there two drivers inside the fixture?

Sorry it was in other post. There are two drivers. Total 300W. 25 blues at 6W each on one driver and 25 whites at 6W each on the other.