New Custom Mounting Brackes for Aqua Illuminations LEDs and EcoTech Radion

[claymax]

oh man totally called it, but seriously this is awesome. well done, well done.

[Nano]

dont forget my 7% for the designing just kidding

[Nano]

I'm loving mine so far, though we may have to incorporate some plugs for the base of the arm that seal the tube once the wire is in, to avoid any moisture getting inside

[Seriak]

How do these attach to the stand and what kind of weight can they support. If I wanted to have one come up on the right side of my tank to hold two radions over a 4' tank would this be possible?

[Nano]

they mount directly to the back of the stand, I mounted mine to the 2x4 frame for support. I'm not sure how much weight, I think that depends on how well you mount it, mine can support about 40lbs but thats all I checked. I used 3/8" lagg bolts to secure it to the stand along with washers

[Seriak]

My problem is I dont have much space behind the tank because of a c2c external overflow and I need both lights to be balance over the tank. I also have a small metal stand with not much to attach to. Maybe I need to talk to Grizz about a custom job.

[molotov]

This idea looks like the same thing Brad did. I believe lastlight did something similar as well. When I had my stand built I had the sleves incorporated into the stand so I had the option of hangers too.

http://www.canreef.com/vbulletin/sho...=66389&page=15

It's a great idea non the less.

[Nano]

Originally Posted by molotov

This idea looks like the same thing Brad did. I believe lastlight did something similar as well. When I had my stand built I had the sleves incorporated into the stand so I had the option of hangers too.

http://www.canreef.com/vbulletin/sho...=66389&page=15

It's a great idea non the less.

same idea, just tweaked I suppose. so far I'm finding it very functional, and clean! and since mine was the prototype/original design, now Greg can probably tweak that to suit just about anyones needs

[lastlight]

How do you move the fixture front-to-back? Do you need to move the bolt into a new position or does it slide?

[martinmcnally]

Originally Posted by lastlight

How do you move the fixture front-to-back? Do you need to move the bolt into a new position or does it slide?

No they do not slide right now its only for fine adjustment the light should already be centered over your tank so the bolt can be removed and adjusted forwards or backwards for some finer adjustment.

However that is a good idea and I might have a slider incorporated.