![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() Finally got my sump today. Thing is alot bigger than I thought. It fits but, the skimmer ain't coming out unless I do some plumbing breakdowns. Going to have modify it just a little bit If I want to get the skimmer cup out. Will try the drain tube first. Picked up a bucket of salt. Just need to get a powerbar an a couple of heaters and powerheads. Then I will be good to go, start filling the tank an cycling it.
Will a 100#'s of LR in my DT be enough ? What will it take to heat the tank an sump ? 2x 250w heaters or one 300w heater. What's the easiest way to fill the whole system with that much water ? Can I fill the tank an sump with R/O Water, heat it, then add the salt ?. I can only do 30 gallons at a time, that is why ask ? Last edited by CountryBoy72; 02-08-2012 at 05:52 AM. |
#3
|
||||
|
||||
![]() Needed more room, so i ripped the floor of the stand out. I laid the 2x6's flat an screwed the plywood back down. Lined the compartment with feltex, should I have any spills It will contain them. That 3 1/2" 's made a world of difference under there. I can now get the skimmer cup out an do any maintenance alot easier. Starting to fill with RO water now :P.
![]() ![]() Last edited by CountryBoy72; 02-08-2012 at 09:52 PM. |
#4
|
||||
|
||||
![]() Changed my return pumps plumbing. I plumbed it through a bulkhead fittting, an drilled the last chamber of my new acrylic sump. Filled the tank with water. Put in the two heaters, a powerhead an turned on the skimmer. I also added my salt. I will test for salinity(adjust it accordingly) and then add some LR to seed the dry rock. I will also add two raw shrimp to get the whole cycling thing started.
|
#5
|
||||
|
||||
![]() Temp- 79.9
PH 7.5 Ammonia .6 Salinity 1.024(little bit below) Going to get some LR(45lbs) an put it in the tank/sump. Added 75 lbs of reef sand too. Anything else I need to do ? Last edited by CountryBoy72; 02-11-2012 at 04:15 AM. |
#6
|
||||
|
||||
![]() ![]() ![]() ![]() |
#7
|
||||
|
||||
![]() Picked up a 30G tank for water changes an to use as a QT tank yesterday. Sits right next to the DT and should make things a little easier.
|
![]() |
Thread Tools | |
Display Modes | |
|
|