LF LED driver - Calgary

[eli@fijireefrock.com]

What kind,I mean what current watts and amps.

[Jackie]

Up To 12 x 3W LED is fine. Thx~

[Ross]

Try modular led.

http://www.modularled.ca/drivers/

[Jackie]

Originally Posted by Ross

Try modular led.

http://www.modularled.ca/drivers/

Yes, just try to see if anyone have any extra from their DIY build in town before I place my order thur ModularLED. Try to save my hard earn $7 shipping.

[sphelps]

I got an extra driver that will power up to 28 LEDs @ 700mA but you need a power supply, ideally 24V if you want to run the full 28 but you can use a 12V to run up to half that, or you can even use an old laptop power supply which are usually 18V.

It's dimmable and PWM controllable. Also have 0-10V converter if you wanted to connect to some kind of controller other than PWM.

It's brand new and only intended for a spare encase I needed it, will sell for cost $40. PM me if you want it.

[eli@fijireefrock.com]

I have some buckpuck drivers that powers 6 led at 3w 1000ma with potentiometer.the only thing is you need to power them with a 24 or 12 v supply.oh and they are free for pickup.