Time for LEDs?

[Aquattro]

Originally Posted by The Grizz

That can be done with the AI Sols because the power cord plugs into the fixture & can be easily snaked through the tube.

Ya, but I'd drill a hole further down the top arm to feed it into, rather than the front opening.

[The Grizz]

Originally Posted by Aquattro

Ya, but I'd drill a hole further down the top arm to feed it into, rather than the front opening.

Once you see the finished set up you will see how it works, the tube ends dead center of the fixture so the cord goes straight up from the plug in, straight along the fixture & into the tube. All you will see the plug itself.

[Aquattro]

Originally Posted by The Grizz

Once you see the finished set up you will see how it works, the tube ends dead center of the fixture so the cord goes straight up from the plug in, straight along the fixture & into the tube. All you will see the plug itself.

Ah, ok. Makes sense now

[Nano]

Originally Posted by Aquattro

Ah, ok. Makes sense now

Yeah I'm going to pull the wires through tomorrow and mount the ARM to the stand, then you guys can get a better idea if the look we went for. It's really clean, non intrusive, and super functional for my little tank. I imagine it could be modded to fit about any stand or light. The nice thing about leds being so light is you could probably build it to mount to the wall, or even sit directly on the floor if that is an option.