![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Someone on RC compared the costs between the two and I believe generally speaking once you're over the 180g mark a reactor is cheaper. I dose on a 400g anyways and love the complete control I have. I have much more faith in a peristaltic doser than I do pressurized gas and needle valves/solenoids etc.
I use Reef Crystals which is quite high in Calcium and as a result I dose less Calcium than Alkalinity. A balanced addition of the two (which from what I understand is what reactors do) would create an imbalance in this case. |
#2
|
|||||
|
|||||
![]() I have about an 800gallon SPS system and I use Balling system via Profilux doser. Much easier to maintain and dial in. No more sudden failures(plugging of the Mazzei injector) of the Ca reactor just as I am about to leave on a trip.
![]() I go through 720ml of Alk a day. It got to the point where I was using so much chems that I just bought in bulk and started producing smaller sizes for people to use in their tanks. My philosophy in this is I sell the same products I use. Check out http://www.oceanfreshaquarium.com/aquarium-additives/ or click my banner on this site. Here is a pic of part of the tank. ![]() and a few of the corals ![]() ![]() Cheers, Tim |
#3
|
|||||
|
|||||
![]() Quote:
__________________
Though a tree grow ever so high, the falling leaves return to the root. 300DD - 140DD ![]() TOTM Fall 2013 |
#4
|
|||||
|
|||||
![]() Do I sniff a frag sale???
Quote:
__________________
It all started with ............. "Finding Nemo" ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|