Unclesalty's 180 Gallon Tank Build Thread

[kien]

Originally Posted by unclesalty

Do you open and close it on a regular basis or does is it just stay open? Bean animal and Uncleof6 from RC were 2 of the people that said not to go with a gate

On mixed reef with the 3 year old valve I open and close it fully maybe once a month. I like to do this to flush any crud that may have collected in there. I probably adjust the valve (minor adjustments), every couple of weeks to re-adjust the water level in the overflow. Although many times this just leads me to opening the valve fully to flush it anyway and then re-adjusting the water level.

As for the 2 year old valve on my FOWLR, that sucker gets opened weekly with every water change (or two weeks if I'm being lazy). It is part of my water change system so gets opened and closed quite a lot.

[unclesalty]

Originally Posted by kien

On mixed reef with the 3 year old valve I open and close it fully maybe once a month. I like to do this to flush any crud that may have collected in there. I probably adjust the valve (minor adjustments), every couple of weeks to re-adjust the water level in the overflow. Although many times this just leads me to opening the valve fully to flush it anyway and then re-adjusting the water level.

As for the 2 year old valve on my FOWLR, that sucker gets opened weekly with every water change (or two weeks if I'm being lazy). It is part of my water change system so gets opened and closed quite a lot.

5 years between 2 of them sounds pretty convincing! A person could put in a ball valve also I guess for water changes but I wouldn't bother with that. Are yours sched 40 or 80? What brand are they? Do you know what your gasket type is on yours?

[kien]

Originally Posted by unclesalty

5 years between 2 of them sounds pretty convincing! A person could put in a ball valve also I guess for water changes but I wouldn't bother with that. Are yours sched 40 or 80? What brand are they? Do you know what your gasket type is on yours?

Well, I wouldn't suggest that my experience is the norm :-) Just my experience with them.

Sched 40 on both. No idea what brand. Just grabbed it out of a box of valves from my LFS <blatant_plug>Red Coral Calgary </blatant_plug>. I have no idea what gasket type, sorry.

[Bblinks]

Originally Posted by kien

Well, I wouldn't suggest that my experience is the norm :-) Just my experience with them.

Sched 40 on both. No idea what brand. Just grabbed it out of a box of valves from my LFS <blatant_plug>Red Coral Calgary </blatant_plug>. I have no idea what gasket type, sorry.

All dark grey valves are sched 80 I believe. Darryl, I would definitely use gate valve over ball valve but just make sure you get the one with threaded ends so you can replace them if need to be.

Tanks is coming along nicely dude, I can't wait till you get some water in that mother. Tank is gonna look awesome with those radions.

[unclesalty]

Originally Posted by Bblinks

All dark grey valves are sched 80 I believe. Darryl, I would definitely use gate valve over ball valve but just make sure you get the one with threaded ends so you can replace them if need to be.

Tanks is coming along nicely dude, I can't wait till you get some water in that mother. Tank is gonna look awesome with those radions.

Yes you are correct Rich usually the sched 80 is grey and sched 40 is white. Sched 40 can also be special ordered in grey from some places I've seen too. Usually I prefer the socket weld ends on fittings for less chance of a leak but the threaded ends on the gate valve for replacement is an excellent idea! I bet your tank looks awesome too with 9 friggin AI'S !!!

[unclesalty]

I just checked now and PVC sched 40 normally in white can be ordered in Black or Clear as well as Grey.

[unclesalty]

Decided to go with a gate valve and ordered a Spears Sched 80 which is a good brand to buy that have been around for years and repair parts should always be available one would think.

[unclesalty]

Originally Posted by Bblinks

All dark grey valves are sched 80 I believe. Darryl, I would definitely use gate valve over ball valve but just make sure you get the one with threaded ends so you can replace them if need to be.

Tanks is coming along nicely dude, I can't wait till you get some water in that mother. Tank is gonna look awesome with those radions.

Thanks to all for steering me towards using a GATE VALVE instead of a ball valve. I found out today repair kits can be bought from Spears to fix leaking stem seals so thats a huge bonus. The gate valve can be fixed/repaired inline without even removing it from the system also.

[lastlight]

I haven't had any system running for much longer than a year so I can't comment on their durability but looks like you chose already anyways! Mine have all been sch 80 and as you discovered if you purchase the deluxe models you can get at the insides to make repairs. I opted to save a few bucks this time but mine would be no big deal to replace entirely.

[unclesalty]

Drill bit finally arrrived today(3 weeks later) but for only $6, shipping included delivered to my door I will take it! I won't bother with showing more drill pics but will show pic when I am done drilling in next day or so.