![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
![]() IME vodka has worked effectively for me. I followed the directions on this site
http://reefkeeping.com/issues/2008-08/nftt/index.php |
#2
|
|||||
|
|||||
![]() Since you said your a "poor grad student" just use the Vodka Sugar Vinegar method minus the vodka. So use 750ml RO water, 3tbsp white sugar and 175ml plain white vinegar. Go slow and gradually increase the dosage. I use this method myself for nitrates and then I use the Foz Down to eliminate the Phosphates.
I will be switching from Rogers white sugar as it is made from GMO Round Up Ready Sugar Beets. Cheers, Tim |
#3
|
||||
|
||||
![]() Thanks guys, VSV is sort of the way I have been leaning as I believe in the idea of multiple carbon sources to avoid creating a bacterial monoculture, but I really like the idea of having the biopellets basically run themselves. When the PhD gets busy, maintenance can slide a little somI want to make some things a bit more automated.
Tim, if I used VSV, how much vodka would you add to that recipe you have there? Would I follow the same dozing scheme as vodka or do I have to wing it, go slow and just feel it out (by which I mean test kit)? |
#4
|
|||||
|
|||||
![]() Well, am still pretty early to have good meaningful results, but am trying the Vertex UF-20 reactor with the Vertex Pro-Bio Pellets. Started a couple months ago, but ramped up very slowly with small additions. Just yesterday, I am now finally up to the maximum recommended bio pellets in my reactor.
For me, it is as much an experiment as anything. I had very high nitrates in my long running, very mature, tank, and wanted to see if I can bring them down, without taking out all my sand and live rock to clean them, and resetting the entire tank. I have a heavy bio load, as I feed my fish about 4 times a day, although small portions. The nitrates were as high as 100, yes, very high, and are now down to about 40. Amazingly, my corals (no fancy or delicate ones) all seem to be doing well, and fish are active and healthy. Probably because I ramped up slowly, I did not have any cyano issues or initial tank cloudiness that some others have reported. I did change my skimmer pump, which may have been my big problem all along. It was only pulling about a cup of skimmate a week before, at best. Now I get that everyday, and more, if I don't dial down the water level in my skimmer. I also use MB7 to ensure a good bacterial culture. So now that I am fully ramped up, will be interesting to see if this will bring my nitrates down all the way or not. I am continuing my feeding as before. My P04, tested (Hanna) last a few days ago, was at .47.
__________________
Reef Pilot's Undersea Oasis: http://www.canreef.com/vbulletin/sho...d.php?t=102101 Frags FS: http://www.canreef.com/vbulletin/sho...d.php?t=115022 Solutions are easy. The real difficulty lies in discovering the problem. |
#5
|
|||||
|
|||||
![]() ![]()
__________________
90 Gal mixed reef with a custom 40 gal sump, SWC Mini S skimmer, 8X56 Watt fan modded Tek, 2x2LF reactors, mag 12 return, Tunze ATO and a modded Tunze 6100 running on a DIY wave controller My TOTM thread http://www.reefersparadise.com/smf/i...?page=page4263 |
#6
|
|||||
|
|||||
![]() Someone I know actually uses both methods. BioPellets and Vodka dosing.
|
#7
|
|||||
|
|||||
![]() MOst of the crash I have seen are from people going to fast and creating a bacteria bloom and that endup up killing all the fish usually from lack of oxygen in the tank.
So what ever you do, go very very slowly.
__________________
_________________________ More fish die from human stupidity than any other disease... |
![]() |
Thread Tools | |
Display Modes | |
|
|