Flow in my 29G cube where to start?

[phyto4life]

my present tank:


I have 1 mp10 set at lagoon mode level 2 in my 29G 30"L x 18"H 12"w and the flow hits the side wall fairly good but any more power and the coral will start to fold back on one side. Only other flow is a hydor korailia #1 behind the rock's and a fluval canister 305

New tank:

24x24x12H the 6" shorter sides give me a little concern with 2 x mp 10's and shorter height

cube has a mag 3 return @ 350 gph inwhich approx 250 gph is going to the display and 100 gph going into my refuge area




Should I just go with 2 x mp10's and set them both @ # 1 then every day slowly raise it?













still trying to learn how to use my camera

[FishyFishy!]

You got vasaline on your lens!!!

I would go with one MP10 and one K nano or #1.

I have a tank with very similar dimensions, and I ran one K2, and a K Nano, with a Mag 9.5 return fed through a SCWD flow director and two outputs, and it was fantastic.

[TheMikey]

One MP10 should be more than enough, imo.

[phyto4life]

Thanks guys, I'll use just the 1 mp10

I was original thinking of going with 1 mp10 for the front right side towards the top and front, then 1 x nano-#1 korailia for behind the rock's.

Then maybe if needed I would add a second nano too.

I'm surprised on how powerful the nano's are in small tank's.


Here's my first try using a tripod.



A little better, but still blurry, way more to learn.