![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#11
|
|||||
|
|||||
![]() The cause of the problem was that I was on vacation and the auto feeders were over feeding for a month
|
#12
|
||||
|
||||
![]() BLANK
Last edited by babyreef; 11-25-2011 at 02:03 PM. |
#13
|
|||||
|
|||||
![]() thanks. my lights are 14000K and fairly new bulbs so i dont think thats it.
im gonna be trying to run 2 x 250 watt lights instead of the 3 i usually run, to see if there is any change on that section of the tank |
#14
|
|||||
|
|||||
![]() Do you have reactors on your tank?
|
#15
|
|||||
|
|||||
![]() No reactors
|
#16
|
|||||
|
|||||
![]() I have been through two outbreaks. Never cleaned or treated. It goes away on it's own after a couple weeks. The best thing is flow. From what I read, you are doing all the right things, even more than I have. It's a bacteria outbreak that has to run it's course. Whatever nutrient it feeds on it seems to use up or perhaps another bacteria overruns it. I wish we could test for what "feeds" the various outbreaks. I am not a clean tank freak, I like a little and have various algae on the back glass and rock. A stable healthy tanks fights off a "cold". My theory for what it's worth.
__________________
28gal reef tank nov 2010 |
#17
|
|||||
|
|||||
![]() Once this stuff starts dying, will it release everything it absorbed back into the water?
|
#18
|
|||||
|
|||||
![]() Quote:
I doubt it, not with phos at 0 and proper sump and skimming. The other suggestion would be to NOT stir up your sandbed to any depth.
__________________
28gal reef tank nov 2010 |
#19
|
|||||
|
|||||
![]() Reduce your feedings, manually remove it, reduce your photo period, keep powerheads on full and, be patient. I had an issue for about a year and I did all of the above and it slowly went away. As others have posted, chemicals are a short term solution. Reducing your bioload until it is gone will also help. I ended up getting rid of a few fish. If you take a quick approach, it will most likely come back. If you don't manually remove it, it can die off and affect your tank. I don't remember exactly what that does, but I wouldn't risk it.
It is a long, slow process. Good luck with staying patient. ![]()
__________________
240 gallon tank build: http://www.canreef.com/vbulletin/sho...d.php?t=110073 Last edited by ponokareefer; 11-01-2011 at 03:46 PM. |
#20
|
||||
|
||||
![]() BLANK
Last edited by babyreef; 11-25-2011 at 02:03 PM. |
![]() |
Thread Tools | |
Display Modes | |
|
|