![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
|
#1
|
|||||
|
|||||
![]() Ok, when I read forceps I automatically assumed the locking/hinged variety with handles more like scissors. After seeing the 'tweezers' Colin's post I checked the J&L link and was surprised that the thing they call forceps are actually tweezers as well. Bottom line for me is, the locking jobs I got from PA are much more functional than the J&L offering. A bit shorter @ 31cm (12") but that's minor compared to having the locking feature. Mine have the curved tip, but straight ones are available as well.
Note the "Kelly" forceps in the following link, this is similar to what I have. http://en.wikipedia.org/wiki/Forceps I guess J&L version would be considered "Thumb" forceps. Edit: I guess what I have is also referred to as a Hemostat.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build ![]() Last edited by mike31154; 10-13-2011 at 03:48 PM. |
#2
|
|||||
|
|||||
![]() Quote:
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#3
|
|||||
|
|||||
![]() i use plastic...... never rusted once
![]() |
#4
|
|||||
|
|||||
![]() If you give them a scrub with one of those green scrub pads the rust will come off (if it hasn't gone in too deep). I use it on my tailored aquatics pair and they're relatively rust free, except for the grooved "grip" part.
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
![]() |
Thread Tools | |
Display Modes | |
|
|