RKL programming help

[bignose]

I'm trying to setup my reef keeper to run a fan when my temp rises too high. I can't get it to work can anyone help?

I programmed a channel like this:
Function: controller
Device: iTemp
Setpoint: 83.0
Hysteresis: 0.1
On when: above

mode = auto
function = fan
set point = 26.5 celsius or whatever temp you have
default = off
save

Then change the main display to show iTemp by pressing the back button.

Did you upgrade to the new firmware?

[bignose]

I don't have function fan, how do I upgrade my firmware?

[apexifd]

go to digital aquatics forum and d/l "Myreef". and hook it up to your PC.

[jostafew]

You could set up the same way I did my chiller:
Function: Controller
Device: iTemp
Setpoint: 78.8 (or your desired temp)
Hysteresis: 0.2
On when: Above

Should kick on at 80 and off at 78.6.

And don't forget to set the mode to Auto as mentioned above. I'm still on the older F/W from a year or two back.

[bignose]

How do I connect to a pc? Do I need the net module?

[Smudge]

You need to use the SID module and the MYReef program.

[babyreef]

BLANK

If you go under Menu --> System --> Units, you can change the temperature to Celsius.

[babyreef]

BLANK